### TEMPLATE OPE FILE FOR nuMOIRCS 
### Version-20200701: v1.01
<HEADER>
PROPOSALID=O200000
OBSERVATION_PERIOD=2020-07-01-18:00:00 - 2020-07-02-06:00:00
</HEADER>

<PARAMETER_LIST>
######################################################################
###     OBJECT LIST     ##############################################
######################################################################
#>>> To Users >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
#>>> Put the coordinate of your targets here.
#>>> The format is 'RA=HHMMSS.SSS DEC=DDMMSS.SS'.
#>>> See the MOIRCS HP for the definition of PA.
#
# Words after 'OBJECT=' will be in the fits header. The use of Capital, 
#  number, and '_' is recommended to use. If you want to use the space, 
#  '-', or lower case, enclose the phrase in double quotation.
#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

### MAIN TARGET ##
ARP220F1=OBJECT=ARP220F1 RA=153457.100 DEC=233711.00 EQUINOX=2000.0 PA=0.0
M83=OBJECT="MESSIER 83" RA=133700.900 DEC=-295156.00 EQUINOX=2000.0 PA=0.0

### STANDARD STARS ##
FS151=OBJECT=FS151 RA=210414.750 DEC=+303021.20 EQUINOX=2000.0 PA=0.0
P177D=OBJECT="P177-D" RA=155913.590 DEC=473641.80 EQUINOX=2000.0 PA=0.0

###  FOCUSING TARGETS ##
##  Usually SA FILLS THE PART. USERS DO NOT NEED TO FILL IN.
M53=OBJECT=M53 RA=131255.300 DEC=+181009.00 EQUINOX=2000.0 PA=0.0
M5=OBJECT=M5 RA=151833.700 DEC=+020458.00 EQUINOX=2000.0 PA=0.0
M107=OBJECT=M107 RA=163231.00 DEC=-130313.00 EQUINOX=2000.0 PA=0.0
M14=OBJECT=MESSIER14 RA=173736.00 DEC=-031445.00 EQUINOX=2000.0 PA=0.0
NGC6749=OBJECT=NGC6749 RA=190515.00 DEC=+015403.00 EQUINOX=2000.0 PA=0.0
M71=OBJECT=MESSIER71 RA=195346.00 DEC=+184642.00 EQUINOX=2000.0 PA=0.0
M15ACS=OBJECT=M15ACS RA=212958.158 DEC=121001.40 EQUINOX=2000.0 PA=-103.0


######################################################################
###   GROBAL SETTINGS (Do Not Change Below) ##########################
######################################################################
###
### LOADING MOIRCS TURRET SETTINGS ###
# For the complete list of the currently defined settings, 
#   see the website below.
# http://subarutelescope.org/Observing/Instruments/MOIRCS/FilterSetting_all.htm

*LOAD "moircs_mec2020.prm"

</PARAMETER_LIST>

<COMMAND>
###############################################################
########### CALIBRATION PART ##################################
###############################################################
################
### PRECHECK ###
#>>> For OPERATORS -- Execute with Cell Cover CLOSED.
#>>> To SA/OP/OBS: check points are below.
#        - Is the image not of MOS mask?
#        - No vignetting on the left edge of ch1 (imaging)?
#        - Count should be around 10000+-3000 ADU.
#        - ch2/ch1 count ratio should be ~1.1 around the center.

SETUPOBE         $DEF_IMG $DEF_IMKS
CHECKFIELD       $DEF_IMG OBJECT=PRECHECK EXPTIME=5.0
#   PUT BP AFTER PRECHECK!
SETUPOBE         $DEF_IMG $DEF_DARK

###########################
### DARK ##################
###########################
#>>> To Users: Dark is usually not important.
#>>    However you can take some darks to sample bad pixels
#>>    for Dome Flats (especially for NB imaging) or Sky Flats.

SETUPOBE         $DEF_IMG $DEF_DARK

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=6 NEXPOSURE=6 DATTYPE=DARK

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=15 NDR=5 NEXPOSURE=10 DATTYPE=DARK
###########################
### IMAGING DOME FLATS   ##
###########################
#<<< Lamp Setting -- use 600W>>>
# Counts should be around 15k-20k ADU.
# Y  18V 5sec
# J  16V 5sec
# H  10V 8sec
# Ks 24V 2.0sec
# NBs (in K-window) 120V 3-10sec, need adjusting.
# Fe2 25V 3.5 sec. need check.



# CLOSE CELLCOVER BEFORE TURN THE LAMP ON
CELLCOVER $DEF_TOOL POSITION=CLOSE

# FILTER CHANGE
SETUPOBE         $DEF_IMG $DEF_IMY
SETUPOBE         $DEF_IMG $DEF_IMJ
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMKS
#
SETUPOBE         $DEF_IMG $DEF_IMNB2083

# OPEN CELLCOVER AFTER ADJUSTING THE LAMP
CELLCOVER $DEF_TOOL POSITION=OPEN

# COUNTCHECK
CHECKFIELD       $DEF_IMG EXPTIME=5

### EXPOSURE -- LAMP_ON
GETOBJECT        $DEF_IMG OBJECT=DOMEON EXPTIME=5.0 NEXPOSURE=7 DATTYPE=DOMEFLAT

### LAMP_OFF: for filters in YJH window see below.
GETOBJECT        $DEF_IMG OBJECT=DOMEOFF EXPTIME=5.0 NEXPOSURE=7 DATTYPE=DOMEFLAT


# Dark data may instead be used as a Lamp-off data for filters in YJH window.
SETUPOBE         $DEF_IMG $DEF_DARK

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=5.0 NEXPOSURE=7 DATTYPE=DARK


###############################################################
########### OBSERVATION PART ##################################
###############################################################

###########################
### FOCUSING ##############
###########################
SETUPFIELD       $DEF_IMG $M53

SETUPOBE         $DEF_IMG $DEF_IMBRG
CHECKFIELD       $DEF_IMG EXPTIME=5

FOCUSTELESCOPE   $DEF_TOOL EXPTIME=10.0 NSTEP=7 Z=0.05 DELTAZ=0.025 FOCUS_MODE=FITSVIEW


# FOCUS_MODE=SINGLE: 
#	Put a high-SN star near the center of the channel 2.
SETUPFIELD       $DEF_IMG $FS151
TELOFFSET        $DEF_TOOL DX=107.5 DY=0 AUTOGUIDE=NO
TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=CHECK2 AUTOGUIDE=NO

FOCUSTELESCOPE   $DEF_TOOL EXPTIME=2.0 NSTEP=7 Z=-0.05 DELTAZ=0.05 FOCUS_MODE=SINGLE FOCUS_AREA=2


##############################################
### IMAGING OBSERVATION   ####################
##############################################
# POINTING TO TARGET
# >> USER: please change the target alias name here. 

SETUPFIELD       $DEF_IMG $ARP220F1 AUTOGUIDE=NO

# SELECT FILTER
# >> USER: ask the SA for the name of filters you want to use.
SETUPOBE         $DEF_IMG $DEF_IMJ

SETUPOBE         $DEF_IMG $DEF_IMKS
SETUPOBE         $DEF_IMG $DEF_IMNB2083

#   FIELD & SKY COUNT CHECK
CHECKFIELD       $DEF_IMG EXPTIME=10 SKYSUB=YES QDAS_FRAME=1
#   IF NECESSARY...
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO


### J deep
#   Exposure
GETOBJECT    $DEF_IMG EXPTIME=60.0 NEXPOSURE=2 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=10.0 AUTOGUIDE=NO

# you may want to add some offset between dither set...
TELOFFSET        $DEF_TOOL DX=-12.0 DY=0.0 AUTOGUIDE=NO
GETOBJECT    $DEF_IMG EXPTIME=60.0 NEXPOSURE=2 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=-10.0 AUTOGUIDE=NO
TELOFFSET        $DEF_TOOL DX=24.0 DY=0.0 AUTOGUIDE=NO
GETOBJECT    $DEF_IMG EXPTIME=60.0 NEXPOSURE=2 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=0.0 AUTOGUIDE=NO


### Y deep
SETUPOBE         $DEF_IMG $DEF_IMY
#   SKY COUNT CHECK
CHECKFIELD       $DEF_IMG EXPTIME=5 SKYSUB=NO QDAS_FRAME=1
#   Exposure
GETOBJECT    $DEF_IMG EXPTIME=150.0 NDR=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=10.0 AUTOGUIDE=NO
GETOBJECT    $DEF_IMG EXPTIME=150.0 NDR=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=-10.0 AUTOGUIDE=NO


### Ks deep
SETUPOBE         $DEF_IMG $DEF_IMKS
#   SKY COUNT CHECK
CHECKFIELD       $DEF_IMG EXPTIME=5 SKYSUB=NO QDAS_FRAME=1
#   Exposure
GETOBJECT    $DEF_IMG EXPTIME=35.0 NEXPOSURE=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=25.0 AUTOGUIDE=NO
TELOFFSET        $DEF_TOOL DX=-12.0 DY=0.0 AUTOGUIDE=NO
GETOBJECT    $DEF_IMG EXPTIME=35.0 NEXPOSURE=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=5.0 AUTOGUIDE=NO

### NB deep
SETUPOBE         $DEF_IMG $DEF_IMNB2083
#   SKY COUNT CHECK
CHECKFIELD       $DEF_IMG EXPTIME=5 SKYSUB=NO QDAS_FRAME=1
#   Exposure
GETOBJECT   $DEF_IMG EXPTIME=150.0 NDR=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=25.0 AUTOGUIDE=NO
GETOBJECT   $DEF_IMG EXPTIME=150.0 NDR=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=5.0 AUTOGUIDE=NO



### SAMPLE FOR SKYNOD OBS
GETOBJECT        $DEF_IMG EXPTIME=180.0 DITHNUM=9 DITHCENTER=NO DITHLENGTH=20.0 DITHANGLE=10.0 SKYNOD=YES NODOFFSET_X=600 NODOFFSET_Y=900 NODDITHANGLE=180 NODDITHLENGTH=50.0 AUTOGUIDE=YES


##############################################
### IMAGING STANDARD STAR ACQUISITION 	######
##############################################
# POINTING:
# >> USER: please change the target alias name here. 

SETUPFIELD       $DEF_IMG $FS151

##  OFFSETS TO EACH CHANNEL CENTER 
# You will have to move the target to the center of 
#   each channel.
#
#   POINTING POSITION -> CHIP-2 CENTER
TELOFFSET        $DEF_TOOL DX=107.5 DY=0 AUTOGUIDE=NO
#   POINTING POSITION -> CHIP-1 CENTER
TELOFFSET        $DEF_TOOL DX=-107.5 DY=0 AUTOGUIDE=NO
#   CHIP-2 CENTER -> CHIP-1 CENTER
TELOFFSET        $DEF_TOOL DX=-215.0 DY=0 AUTOGUIDE=NO
#   CHIP-1 CENTER -> CHIP-2 CENTER
TELOFFSET        $DEF_TOOL DX=215.0 DY=0 AUTOGUIDE=NO

# SELECT FILTER
SETUPOBE         $DEF_IMG $DEF_IMJ
SETUPOBE         $DEF_IMG $DEF_IMKS
SETUPOBE         $DEF_IMG $DEF_IMNB2083

#  POSITION AND COUNTCHECK -- PEAK SHOULD BE < 25000 (RAW)
CHECKFIELD       $DEF_IMG EXPTIME=3.0  QDAS_FRAME=2

# if necessary...correct position
TELOFFSET        $DEF_TOOL DX=0.0 DY=0 AUTOGUIDE=NO

##  DATA ACQUISITION wide dither x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR




################################################################
## You can optionally make the obs sequence such as below.. ####
################################################################

#   go to target star, filter change to J for example.
SETUPFIELD       $DEF_IMG $FS151
SETUPOBE         $DEF_IMG $DEF_IMJ

#   move star to ch2 center.
TELOFFSET        $DEF_TOOL DX=107.5 DY=0 AUTOGUIDE=NO

### J standard star obs ###
#  COUNTCHECK -- PEAK SHOULD BE < 20000 (RAW)
CHECKFIELD       $DEF_IMG EXPTIME=3.0  QDAS_FRAME=2
#  if necessary...correct position
TELOFFSET        $DEF_TOOL DX=0.0 DY=0 AUTOGUIDE=NO

#   DATA ACQUISITION for ch2 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR

#  move star from CHIP-2 to CHIP-1
TELOFFSET        $DEF_TOOL DX=-215 DY=0 AUTOGUIDE=NO

#   DATA ACQUISITION for ch1 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR


### Y standard star obs ###
SETUPOBE         $DEF_IMG $DEF_IMY
#  COUNTCHECK -- ch1
CHECKFIELD       $DEF_IMG EXPTIME=3.0 QDAS_FRAME=1

#   DATA ACQUISITION for ch1 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR

#   move star from CHIP-1 to CHIP-2
TELOFFSET        $DEF_TOOL DX=215 DY=0 AUTOGUIDE=NO

#   DATA ACQUISITION for ch2 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR


### Ks standard star obs ###
SETUPOBE         $DEF_IMG $DEF_IMKS
#  COUNTCHECK -- ch2
CHECKFIELD       $DEF_IMG EXPTIME=3.0  QDAS_FRAME=2

#   DATA ACQUISITION for ch2 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR

#   CHIP-2 TO CHIP-1
TELOFFSET        $DEF_TOOL DX=-215 DY=0 AUTOGUIDE=NO

#   DATA ACQUISITION for ch1 x2
GETOBJECT        $DEF_IMG EXPTIME=5 DITHNUM=2 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR


</COMMAND>