### TEMPLATE OPE FILE FOR MOIRCS SPECTROSCOPY MODE
### PREPARED BY ICHI TANAKA
### Ver.20080125
<HEADER>
PROPOSALID=O00000
OBSERVATION_PERIOD=2008-00-00-18:30:00 -- 2008-00-00-06:30:00
OBE_ID=MOIRCS
#   OBE_MODE=IMAG
#   OBE_MODE=SPEC
OBE_MODE=SPEC_MOS
</HEADER>

<PARAMETER_LIST>
### OBJECT LIST ###
# <<< Put the coordinate of your targets here>>>
# <<< RA/DEC and the PA should be the same as the mask design setting>>>
M42=OBJECT=MESSIER42 RA=064037.900 DEC=091841.00 EQUINOX=2000.0 PA=0.0


##  SPECTROSCOPIC STANDARDS
#  <<< Should be about Ks > 8.5 mag (fainter) in A0V for R500.>>>  
#  <<< See the MOIRCS website for saturation magnitude.>>>
SPECSTD1=OBJECT=RationingStar1 RA=064040.00 DEC=091840.0 EQUINOX=2000.0 PA=0.0

### spectroscopic flux standards 
# <<< if necessary >>>
GD71=OBJECT=GD71 RA=055227.5 DEC=+155317.0  EQUINOX=2000.0 PA=0.0


##  FOCUSING
# <<< USUALLY SS PROVIDES TARGET INFO. >>>
# <<< If you have some star-rich fields near your targets, >>>
# <<<   you can put the coordinates here. >>>
M3=OBJECT=MESSIER3 RA=134211.00 DEC=+282232.00 EQUINOX=2000.0 PA=0.0

######################################
### GLOBAL SETTINGS
# <<< Do not change below >>>
DEF_IMG=OBE_ID=MOIRCS OBE_MODE=IMAG
DEF_TOOL=OBE_ID=MOIRCS OBE_MODE=TOOL
DEF_LSLIT=OBE_ID=MOIRCS OBE_MODE=SPEC
DEF_MOS=OBE_ID=MOIRCS OBE_MODE=SPEC_MOS

### MECHANISM SETTINGS
##  FILTER and GRISM SETTING 
DEF_DARK=GRISM=BP
DEF_IMJ=FILTER_A=J FILTER_B=CSL GRISM=HOLE
DEF_IMH=FILTER_A=H FILTER_B=CSL GRISM=HOLE
DEF_IMKS=FILTER_A=KS FILTER_B=CSL GRISM=HOLE
DEF_IMK=FILTER_A=STD_K FILTER_B=CSL GRISM=HOLE
DEF_IMH2=FILTER_A=H2 FILTER_B=CSL GRISM=HOLE
DEF_IMFE2=FILTER_A=FE2 FILTER_B=CSL GRISM=HOLE
DEF_IMK_CONT=FILTER_A=K_CONT FILTER_B=CSL GRISM=HOLE

DEF_HK500=FILTER_A=OC_HK FILTER_B=CSL GRISM=HK500
DEF_HK500K=FILTER_A=STD_K FILTER_B=CSL GRISM=HK500
DEF_HK500LONG=FILTER_A=OC1_3 FILTER_B=CSL GRISM=HK500
DEF_ZJ500=FILTER_A=OC_ZJ FILTER_B=CSL GRISM=ZJ500
DEF_ZJ500HOLE=FILTER_A=HOLE FILTER_B=CSL GRISM=ZJ500

DEF_J1300=FILTER_A=J FILTER_B=CSL GRISM=R1300
DEF_H1300=FILTER_A=H FILTER_B=CSL GRISM=R1300
DEF_K1300=FILTER_A=STD_K FILTER_B=CSL GRISM=R1300


### OFFSET FOR LONGSLIT (LS200709 chip2): UPDATE 2007-11-28
## 0.5, 0.8, 1.1 has 400pix length. / 0.3 and 2.0 has 200 pix.
LS0709_2_0.5=DX=68.5 DY=-87.8
LS0709_2_0.8=DX=68.5 DY=22.7
LS0709_2_1.1=DX=68.5 DY=-26.4
LS0709_2_2.0=DX=68.5 DY=70.1
LS0709_2_0.3=DX=68.5 DY=95.8

### OFFSET VALUE FOR SLITLETS FOR STD ON EACH MASK
# <<< The SS will supply here. Please send the slit ID used for>>
# <<<   Rationing Star observaton for each MOS mask to the SS. >>
# OFF_(MaskName)_(channel)
OFF_USER1_1=DX=-0 DY=0
OFF_USER1_2=DX=+0 DY=0
OFF_USER2_1=DX=-0 DY=0
OFF_USER2_2=DX=+0 DY=0
# If you already know the position of slits for RS obs in 
#   raw image coordinate, you can use the format below instead.
# OFF_USER1_1=SLITX=1800 SLITY=1024 SLITCHIP=1
# OFF_USER1_2=SLITX=235 SLITY=1024 SLITCHIP=2

</PARAMETER_LIST>


<COMMAND>
###############################################################
########### CALIBRATION PART ##################################
###############################################################

############
### DARK ###
############
# <<< Set the exposure time you use for scientific data>>>

SETUPOBE         $DEF_IMG $DEF_DARK
# For Test
GETOBJECT        $DEF_IMG OBJECT=DARK DATTYPE=DARK EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=5


# For Specdata
GETOBJECT        $DEF_IMG OBJECT=DARK DATTYPE=DARK EXPTIME=300 NDUMMYREAD=2 NDR=8 NEXPOSURE=5


########################################
### DOME FLAT: SPEC ####################
#######################################
# List the name of your masks supplied by the SS.
#   23 USER1
#   0 USER2
#   1 USER3
#   14 LS200709
#   17 LS200608
####
# <<< For DOME FLAT acquisition, ask SS>>>
SETUPOBE         $DEF_MOS $DEF_HK500 MASK=USER1 EXCHANGE_MODE=START ZENITH=NO
SETUPOBE         $DEF_MOS MASK=USER2 EXCHANGE_MODE=EXCHANGE ZENITH=NO
SETUPOBE         $DEF_MOS $DEF_K1300

##      COUNT CHECK
CHECKFIELD       $DEF_MOS OBJECT=DOMEFLAT EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=NO QDAS_FRAME=2

##	EXPOSURE
GETOBJECT        $DEF_MOS OBJECT=DOMEFLAT EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=5

### MOS MASK IMAGE ################
#  MOS and FILTER
SETUPOBE         $DEF_IMG $DEF_IMKS

CHECKFIELD       $DEF_IMG EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=NO QDAS_FRAME=2

GETOBJECT        $DEF_IMG OBJECT=MASKIMAGE EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=1 AUTOGUIDE=NO


### STORE MASK  ###################
SETUPOBE         $DEF_MOS EXCHANGE_MODE=FIN ZENITH=NO


###########################################################
###    COMPARISON/CAL_FLAT acquisition   ##################
###########################################################
# <<< Ask the SS if you plan to take ThAr comparison. >>>
##      COUNT CHECK
CHECKFIELD       $DEF_MOS OBJECT=TEST EXPTIME=21 NDUMMYREAD=2 QDAS_FRAME=2 AUTOGUIDE=YES

##	EXPOSURE: FOR MOS
GETCALFLAT       $DEF_MOS OBJECT="TH-AR" EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=1 STEP=[-70 -35 0 35 70]

##  FOR LONG SLIT
#   CHIP 1
GETCALFLAT       $DEF_MOS OBJECT="TH-AR" EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=1 STEP=-25
#   CHIP 2
GETCALFLAT       $DEF_MOS OBJECT="TH-AR" EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=1 STEP=25


### STORE MASK  ##############
SETUPOBE         $DEF_MOS EXCHANGE_MODE=FIN ZENITH=NO



###############################################################
########### OBSERVATION PART ##################################
###############################################################

###############################
### FOCUSING ###
###############################
# <<< Put your focusing fields at SETUPFIELD commands below.>>>
SETUPFIELD       $DEF_IMG $DEF_IMKS $M3
#   CHANGE FILTER IF NECESSARY
SETUPOBE         $DEF_IMG $DEF_IMJ

#   MOIRCS FOCUSING SEQUENCE
FOCUSTELESCOPE   $DEF_TOOL EXPTIME=13.0 NDUMMYREAD=0 NSTEP=9 Z=0.170 DELTAZ=0.025 FOCUS_MODE=ANA

 
##############################
### LONG SLIT ACQUISITION ####
##############################

##  SETUPFIELD WITH OFFSET OPTION: DIRECTLY GOES TO THE SLIT POSITION.
# <<< put your long-slit targets at SETUPFIELD commands below.>>>
# <<< !! Use H2 filter for Rationing Stars !!>>>

SETUPFIELD       $DEF_LSLIT $DEF_IMH2 $SPECSTD1 $LS0709_2_0.8

##   FIELD CHECK
CHECKFIELD       $DEF_LSLIT OBJECT=TEST EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=NO QDAS_FRAME=2
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO


##  SETUPSLIT -- TARGET ACQUISITION ON THE SLIT
# <<< CHANGE MASK NAME, MODE, QDAS_FRAME >>>
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=START MASK=LS200709 EXPTIME=12 NDUMMYREAD=0 QDAS_FRAME=2 ZENITH=YES
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=EXCHANGE MASK=LS200608 EXPTIME=12 NDUMMYREAD=0 QDAS_FRAME=2 ZENITH=YES
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=STORE EXPTIME=12 NDUMMYREAD=0 QDAS_FRAME=2 ZENITH=YES


##  FURTHER TUNING
CHECKFIELD       $DEF_LSLIT EXPTIME=12 NDUMMYREAD=0 AUTOGUIDE=YES SKYSUB=NO QDAS_FRAME=2


#   TELOFFSET BY QDAS
#   FOR FINE TUNING --> CHANGE TO PROBESYNC=NO
TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=CHECK2 AUTOGUIDE=YES PROBESYNC=YES
TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=[MCSA00035398 MCSA00035400] AUTOGUIDE=YES PROBESYNC=YES
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=YES PROBESYNC=YES


###      SPEC DATA ACQUISITION
##     !!! DO NOT FORGET PUTTING GRISM !!!
SETUPOBE         $DEF_LSLIT $DEF_HK500
SETUPOBE         $DEF_LSLIT $DEF_ZJ500

#   COUNTCHECK   
CHECKFIELD       $DEF_LSLIT EXPTIME=21 NDUMMYREAD=2 AUTOGUIDE=YES SKYSUB=NO

##   DATA ACQUISITION
GETOBJECT        $DEF_LSLIT EXPTIME=21 NDUMMYREAD=2 DITHNUM=2 DITHLENGTH=5.0 SKYNOD=NO DITHANGLE=90.0

#    For Deep Obs
GETOBJECT        $DEF_LSLIT EXPTIME=300 NDUMMYREAD=2 NDR=8 DITHNUM=2 DITHLENGTH=5.0 DITHANGLE=90.0

# goto ch1<->ch2: 
TELOFFSET        $DEF_TOOL DX=153.5 DY=11.1 AUTOGUIDE=YES




###########################
### MOS ACQUISITION #######
###########################
 
##  SETUPFIELD
# <<< put your target names on SETUPFIELD commands.>>>
SETUPFIELD       $DEF_MOS $DEF_IMKS $M42

#   CHECK and OFFSET if necessary
CHECKFIELD       $DEF_MOS EXPTIME=15 NDUMMYREAD=0 SKYSUB=YES AUTOGUIDE=NO QDAS_FRAME=2
TELOFFSET        $DEF_TOOL MODE=OBS DX=0.0 DY=0.0 AUTOGUIDE=NO


##  SETUPSLIT -- TARGET ACQUISITION TO MOS MASK
# <<< CHANGE THE MASK NAME PART >>>
SETUPSLIT        $DEF_MOS EXCHANGE_MODE=START MASK=USER1 EXPTIME=30 NDUMMYREAD=2 ZENITH=YES
SETUPSLIT        $DEF_MOS EXCHANGE_MODE=EXCHANGE MASK=USER2 EXPTIME=30 NDUMMYREAD=2 ZENITH=YES


#   FOR FURTHER ITERATION
CHECKFIELD       $DEF_MOS EXPTIME=30 NDUMMYREAD=2 AUTOGUIDE=YES QDAS_FRAME=2 SKYSUB=NO

#   "ANA WINDOW" FOR OFFSET
TELOFFSET        $DEF_TOOL MODE=ANA AUTOGUIDE=YES PROBESYNC=NO


# IF ZENITHRECOVER IS USED, EXEC BELOW FOR BACK TO OBJECT POSITION
TELOFFSET        $DEF_TOOL MODE=OBS DX=-10.0 DY=0.0 AUTOGUIDE=YES

##  BACKUP TELOFFSET: 
#   DIRECT INPUT
TELOFFSET        $DEF_TOOL MODE=OBS DX=0.0 DY=0.0 AUTOGUIDE=YES PROBESYNC=YES
PAOFFSET         $DEF_TOOL DPA=0.0 AUTOGUIDE=YES
#   PICK UP FROM QDAS WINDOW
CHECKFIELD       $DEF_MOS EXPTIME=13 AUTOGUIDE=YES SKYSUB=NO QDAS_FRAME=2

###      SPEC DATA ACQUISITION 
### !!! DO NOT FORGET PUTTING GRISM !!!
# <<<   Put the grism setting you use below. >>>
SETUPOBE         $DEF_MOS $DEF_HK500
SETUPOBE         $DEF_MOS $DEF_ZJ500

#      CHECK IF NECESSARY
CHECKFIELD       $DEF_MOS EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=YES QDAS_FRAME=2

##      EXPOSURE
#  <<< SET DITHLENGTH (dither length in arcsec) APPROPRIATELY >>>
GETOBJECT        $DEF_MOS EXPTIME=600 NDUMMYREAD=2 NDR=8 DITHNUM=2 DITHLENGTH=3.5

#  W/SKYNOD OPTION
GETOBJECT        $DEF_MOS EXPTIME=600 NDUMMYREAD=2 NDR=8 DITHNUM=2 DITHLENGTH=3.5 SKYNOD=YES NODOFFSET_RA=0 NODOFFSET_DEC=1200.0



### MOS STAR CHECK ###

SETUPOBE         $DEF_IMG $DEF_IMKS
CHECKFIELD       $DEF_MOS EXPTIME=30.0 NDUMMYREAD=2 AUTOGUIDE=YES QDAS_FRAME=2 SKYSUB=YES

#   "ANA WINDOW" FOR OFFSET
TELOFFSET        $DEF_TOOL MODE=ANA AUTOGUIDE=YES PROBESYNC=NO


#   BACKUP TELOFFSET: QDAS QUICK RECOVERY
TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=CHECK2 AUTOGUIDE=YES PROBESYNC=NO
#   BACKUP TELOFFSET: DIRECT INPUT
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=YES PROBESYNC=NO


### !! PUT GRISM AFTER CHECK !! ###
SETUPOBE         $DEF_MOS $DEF_HK500


##################################
### STANDARD STAR ON MOS      ####
##################################
# <<< put memo for star info: example below>>>
#   FOR USER1 mask: SPECSTD1 A0V  V=8.0  K=10.0

##  SETUPFIELD WITH OFFSET TO THE SLIT
# <<< Put your target name on SETUPFIELD below>>>
#   channel 2
SETUPFIELD       $DEF_MOS $DEF_IMH2 $SPECSTD1 $OFF_USER2_1


#   FieldCheck
CHECKFIELD       $DEF_IMG EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=NO QDAS_FRAME=2
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO MODE=OBS


##  SETUPSLIT -- Using QDAS WINDOW in DEF_LSLIT mode
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=START MASK=USER1 QDAS_FRAME=2 EXPTIME=12 ZENITH=YES
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=STORE QDAS_FRAME=2 EXPTIME=12 ZENITH=YES
SETUPSLIT        $DEF_LSLIT EXCHANGE_MODE=EXCHANGE MASK=USER2 QDAS_FRAME=2 EXPTIME=12 ZENITH=YES


#   BY QDAS
CHECKFIELD       $DEF_LSLIT EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=YES QDAS_FRAME=2

TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=CHECK2 AUTOGUIDE=YES PROBESYNC=NO
TELOFFSET        $DEF_TOOL MODE=QDAS INPUT_FRAME=[MCSA00045398 MCSA00045400] AUTOGUIDE=YES PROBESYNC=YES

##   EXPOSURE #
#     !!! DO NOT FORGET PUTTING GRISM !!!
SETUPOBE         $DEF_LSLIT $DEF_HK500
SETUPOBE         $DEF_LSLIT $DEF_ZJ500

#   COUNTCHECK   
CHECKFIELD       $DEF_LSLIT EXPTIME=13 NDUMMYREAD=0 AUTOGUIDE=YES QDAS_FRAME=2

##   DATA ACQUISITION
# <<< Put the appropriate DITHLENGTH values on GETOBJECT below.>>>
GETOBJECT        $DEF_LSLIT EXPTIME=21 NDUMMYREAD=2 DITHNUM=2 DITHLENGTH=6.0


################################################################
##### FOR BACKUP OBSERVATION ###################################
################################################################

#######################################
##  IMAGING, PHOTOMETRIC STDS ETC ######
#######################################
##  PHOTOMETRIC STANDARD OBSERVATION 
SETUPFIELD       $DEF_IMG $DEF_IMKS $GD71
#   OR DIRECTLY PUT THE STAR IN CHIP2 CENTER
SETUPFIELD       $DEF_MOS $DEF_IMKS $GD71 DX=92.0 DY=4.0 AUTOGUIDE=NO

##  MOVE THE STANDARD STAR BETWEEN CHANNELS
##  POINTING POSITION -> CHIP-2 CENTER (ALREADY DONE)
TELOFFSET        $DEF_TOOL DX=91.67 DY=3.76 AUTOGUIDE=NO
##  CHANNEL 2 -> CHANNEL 1.
TELOFFSET        $DEF_TOOL DX=-178.23 DY=-1.42 AUTOGUIDE=NO
##  CHANNEL 1 -> CHANNEL 2
TELOFFSET        $DEF_TOOL DX=178.23 DY=1.42 AUTOGUIDE=NO

##  FINE TUNE
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO

#   FILTER CHANGE
SETUPOBE         $DEF_IMG $DEF_IMH

#   CHECK
CHECKFIELD       $DEF_IMG OBJECT=IMAG_TEST EXPTIME=4 PRD_SIZE=512 NDUMMYREAD=2

#   EXPOSURE -- SET DITHNUM, EXPTIME etc.
#   Minimum exp time (in NDUM=2) - add +1.5 sec for better result.
# 512 x 512 -- 2.011 sec
# 1024 x 1024 -- 5.953
# 1536 x 1536 -- 11.844
# whole read -- 19.685 

GETOBJECT        $DEF_IMG EXPTIME=8 NDUMMYREAD=2 PRD_SIZE=1024 DITHNUM=4 DITHCENTER=NO DITHLENGTH=40.0 DITHANGLE=45 DATTYPE=STANDARD_STAR

#################################
### DEEP IMAGING ################
#################################
#   FIELDS
SETUPFIELD       $DEF_IMG $M42

#   FILTER CHEANGE
SETUPOBE         $DEF_IMG $DEF_IMKS
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMJ

#   FIELDCHECK
CHECKFIELD       $DEF_IMG EXPTIME=21 NDUMMYREAD=2 SKYSUB=YES
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO

##  TARGET OBSERVATION
#   SET EXPTIME, COADDS, DITHNUM etc.
#   If you repeat GETOBJECT command, change DITHANGLE randomly.


GETOBJECT        $DEF_IMG EXPTIME=50.0 NDUMMYREAD=2 COADDS=3 DITHNUM=8 DITHCENTER=YES DITHLENGTH=20.0 DITHANGLE=10

#   USE IF NECESSARY
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO

</COMMAND>