### TEMPLATE OPE FILE FOR MOIRCS IMAGING MODE
### PREPARED BY ICHI TANAKA
### Ver.20081202 -- NEW SCIENTIFIC-GRADE CHIP FOR CH1: STILL USE NDUMMYREAD=2
<HEADER>
PROPOSALID=O080000
OBSERVATION_PERIOD=2008-09-30-18:30:00 - 2008-10-01-06:30:00
OBE_ID=MOIRCS
OBE_MODE=IMAG
</HEADER>

<PARAMETER_LIST>
### GROBAL SETTINGS
DEF_IMG=OBE_ID=MOIRCS OBE_MODE=IMAG
DEF_TOOL=OBE_ID=MOIRCS OBE_MODE=TOOL

##  FILTERS
DEF_IMY=FILTER_A=Y FILTER_B=CSL GRISM=HOLE
DEF_IMJ=FILTER_A=J FILTER_B=CSL GRISM=HOLE
DEF_IMH=FILTER_A=H FILTER_B=CSL GRISM=HOLE
DEF_IMKS=FILTER_A=KS FILTER_B=CSL GRISM=HOLE

DEF_IMH2=FILTER_A=H2 FILTER_B=CSL GRISM=HOLE
DEF_IMFE2=FILTER_A=FE2 FILTER_B=CSL GRISM=HOLE
DEF_IMNB119=FILTER_A=NB119 FILTER_B=CSL GRISM=HOLE
DEF_IMK_CONT=FILTER_A=K_CONT FILTER_B=CSL GRISM=HOLE

### OBJECT LIST
## TARGET 
#   <<< put your target information here >>>
ARP220=OBJECT=ARP220 RA=153457.100 DEC=233011.00 EQUINOX=2000.0 PA=0.0
M83=OBJECT="MESSIER 83" RA=133700.900 DEC=-295156.00 EQUINOX=2000.0 PA=0.0

## STANDARDS
#   <<< put your standard star information here >>>
# e.g. FS21  J=13.020 H=13.064 Ks=13.168 
FS21=OBJECT=FS21 RA=113705.15 DEC=+294758.4 EQUINOX=2000.0 PA=0.0


##  FOCUSING TARGETS
#   <<< Ask the SS for good clusters for your run.>>>
#   <<< Rich star clusters near your targets will be used.>>>

M3=OBJECT=MESSIER3 RA=134211.00 DEC=+282232.0 EQUINOX=2000.0 PA=0.0

</PARAMETER_LIST>


<COMMAND>
###############################################################
########### CALIBRATION PART ##################################
###############################################################

###########################
### DARK ##################
###########################
#   <<< USUALLY DARK CAN BE IGNORED >>>

SETUPOBE         $DEF_IMG GRISM=BP

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=21 NDUMMYREAD=2 NEXPOSURE=5 DATTYPE=DARK

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=50 COADDS=3 NDUMMYREAD=2 NEXPOSURE=5 DATTYPE=DARK


#####################################
### DOME FLAT 		#############
### Dome setting is WITHOUT Top Screen !! #####
#
# Examples are based on real data.
# Highest QE regions are used for estimates.
#  ch1->[1200:1700,100:400] 
#  ch2->[500:1700,1600:1900]
#####################################
### Y-band Dome  ###
## BRIGHT Dome:  10W, 3.7V,  T=25sec -> 17100ADU (CH1) 14600ADU (CH2) -- Oct08
#		 600W, 13V, T=28sec  -> 18000ADU (CH1) 15400ADU (CH2) -- Sep08
## FAINT Dome:   10W, 2.3V,  T=25sec -> 3100ADU (CH1) 2600ADU (CH2) -- Oct08
#                600W, 9.2V, T=28sec -> 3800ADU (CH1) 3200ADU (CH2) -- Sep08

SETUPOBE         $DEF_IMG $DEF_IMY

CHECKFIELD       $DEF_IMG EXPTIME=13.0

GETOBJECT        $DEF_IMG OBJECT=DOMEON EXPTIME=25.0 NEXPOSURE=8 NDUMMYREAD=2 DATTYPE=DOMEFLAT
GETOBJECT        $DEF_IMG OBJECT=DOMEOFF EXPTIME=25.0 NEXPOSURE=8 NDUMMYREAD=2 DATTYPE=DOMEFLAT


### J-band Dome  ###
## BRIGHT Dome:   10W, 3.7V,  T=30sec -> ADU (CH1) 19000ADU (CH2) -- estimate.
#		  600W, 10V, T=30sec  -> 15600ADU (CH1) 16200ADU (CH2) -- Sep08
## FAINT Dome:    10W, 2.1V,  T=30sec -> ADU (CH1) 3350ADU (CH2) -- estimate.
#                 600W, 7.2V, T=30sec  -> 3800ADU (CH1) 3900ADU (CH2) -- Sep08

SETUPOBE         $DEF_IMG $DEF_IMJ

CHECKFIELD       $DEF_IMG EXPTIME=13.0

GETOBJECT        $DEF_IMG OBJECT=DOMEON EXPTIME=30.0 NDUMMYREAD=2 NEXPOSURE=8 DATTYPE=DOMEFLAT

GETOBJECT        $DEF_IMG OBJECT=DOMEOFF EXPTIME=30.0 NDUMMYREAD=2 NEXPOSURE=8 DATTYPE=DOMEFLAT


### H-band Dome  ###
## BRIGHT Dome .... 10W, 2.7V,  T=30sec -> 18000ADU (CH1~CH2) -- Sep08
#		   (600W, 7.5V, T=30sec  -> 17000ADU  -- OLD: TBR)
## FAINT Dome  .... 10W, 1.7V,  T=30sec -> 4000ADU (CH1~CH2) -- Sep08
#		   (600W, 5.0V, T=30sec  -> 5000ADU  -- OLD: TBR)

SETUPOBE         $DEF_IMG $DEF_IMH

CHECKFIELD       $DEF_IMG EXPTIME=13.0

GETOBJECT        $DEF_IMG OBJECT=DOMEON EXPTIME=30.0 NDUMMYREAD=2 NEXPOSURE=8 DATTYPE=DOMEFLAT

GETOBJECT        $DEF_IMG OBJECT=DOMEOFF EXPTIME=30.0 NDUMMYREAD=2 NEXPOSURE=8 DATTYPE=DOMEFLAT


### Ks-band Dome  ###
## !!! Should take in morning (requires cool dome surface). !!!
## Take "lamp-off dome" first (>10 exposure, 21 sec).
##   If lamp-off data is already high (>12000ADU), take many more.
##   If the count is too high (>15000ADU), taking dome may be difficult.
#
## Lamp-on Dome data .... Use 600W lamp with 6.5-8V (depending on
##                        the lamp-off count). >10 exposure 21 sec.

SETUPOBE         $DEF_IMG $DEF_IMKS

CHECKFIELD       $DEF_IMG EXPTIME=13.0

GETOBJECT        $DEF_IMG OBJECT=DOMEOFF EXPTIME=21.0 NDUMMYREAD=2 NEXPOSURE=15 DATTYPE=DOMEFLAT

GETOBJECT        $DEF_IMG OBJECT=DOMEON EXPTIME=21.0 NDUMMYREAD=2 NEXPOSURE=15 DATTYPE=DOMEFLAT




###############################################################
########### OBSERVATION PART ##################################
###############################################################

###########################
### FOCUSING ##############
###########################
#   <<<To OBS: Edit the targets if you have any preferred focusing fields. >>>

SETUPFIELD       $DEF_IMG $DEF_IMH2 $M3

SETUPOBE         $DEF_IMG $DEF_IMJ

CHECKFIELD       $DEF_IMG EXPTIME=7.0 PRD_SIZE=1024

#   CHANGE NSTEP AND Z
FOCUSTELESCOPE   $DEF_TOOL EXPTIME=12.0 NDUMMYREAD=0 NSTEP=9 Z=0.20 DELTAZ=0.025 FOCUS_MODE=ANA


###########################
### DEEP IMAGING ##########
###########################
##  FIELD SELECTION
#   <<<To OBS: Edit the SETUPFIELD command by adding your targets>>>

SETUPFIELD       $DEF_IMG $DEF_IMKS $ARP220 AUTOGUIDE=NO

#   FILTER CHEANGE
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMJ

#   FIELDCHECK
CHECKFIELD       $DEF_IMG EXPTIME=15 SKYSUB=YES
#   IF NECESSARY...
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO


##  TARGET OBSERVATION
#<<<To OBS: Edit the lines below according to your observing plan as  
#   you like.  The exposures given below are just the typical values under 
#   normal sky condition.  The acutal values will change each night/
#   time/airmass.  For details, see imag_obsguide_MOIRCS.pdf >>>

#<<<To OBS: Change DITHLENGTH and DITHANGLE values arbitarily when you 
# repeat GETOBJECT command. That will eliminate the latent image 
# near bright stars.  >>>

#   J -- COADD 1
GETOBJECT        $DEF_IMG EXPTIME=120.0 NDUMMYREAD=2 COADDS=1 DITHNUM=9 DITHCENTER=YES DITHLENGTH=24.0 DITHANGLE=10.0 AUTOGUIDE=NO

#   H -- COADD 4
GETOBJECT        $DEF_IMG EXPTIME=30.0 NDUMMYREAD=2 COADDS=4 DITHNUM=9 DITHCENTER=YES DITHLENGTH=24.0 DITHANGLE=10.0 AUTOGUIDE=NO

#   KS -- COADD 3
GETOBJECT        $DEF_IMG EXPTIME=50.0 NDUMMYREAD=2 COADDS=3 DITHNUM=9 DITHCENTER=YES DITHLENGTH=24.0 DITHANGLE=10.0 AUTOGUIDE=NO

#

#   THE USE OF THE [SKYNOD OPTION] -- EXAMPLE
#   NODOFFSET_? DEFINES THE SKY POSITION FROM THE POINTING POSITION.
#   NODDITHLENGTH IS THE DITHER LENGTH ON SKY POSITION.
#   <<<!! Ask SS for details if you want to use this option !!>>>

SETUPFIELD       $DEF_IMG $DEF_IMKS $M83 AUTOGUIDE=NO

#   FIELDCHECK
CHECKFIELD       $DEF_IMG EXPTIME=21 NDUMMYREAD=2 SKYSUB=YES DITHLENGTH=60

#   !! KEEP DITHCENTER=NO !!
GETOBJECT        $DEF_IMG EXPTIME=50.0 NDUMMYREAD=2 COADDS=3 DITHNUM=9 DITHCENTER=NO DITHLENGTH=25.0 DITHANGLE=10.0 SKYNOD=YES NODOFFSET_X=600 NODOFFSET_Y=900 NODDITHANGLE=180 NODDITHLENGTH=50.0



###########################
### STANDARD STARS ########
###########################
##  TARGETS
#   <<<To OBS: Add your standard star names on SETUPFIELD command >>>
SETUPFIELD       $DEF_IMG $DEF_IMKS $FS21

##  FILTERS
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMJ


##  OFFSETS
#   POINTING POSITION -> CHIP-2 CENTER
TELOFFSET        $DEF_TOOL DX=91.0 DY=3.8 AUTOGUIDE=NO
#   POINTING POSITION -> CHIP-1 CENTER
TELOFFSET        $DEF_TOOL DX=-81.5 DY=2.4 AUTOGUIDE=NO
#   CHIP-1 TO CHIP-2
TELOFFSET        $DEF_TOOL DX=178.2 DY=1.4 AUTOGUIDE=NO
#   CHIP-2 TO CHIP-1
TELOFFSET        $DEF_TOOL DX=-178.2 DY=-1.4 AUTOGUIDE=NO

#   FOR FURTHER CORRECTION
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO

##  CHECK SATURATION -- PEAK SHOULD BE < 25000 (RAW) ON CH2.
# PARTIAL READ: EXP > [MINIMUM EXPOSURES FOR PRD_SIZE] + [1-1.5] sec
#  512 x 512  ->   2.011 sec
#  1k x 1k    ->   5.943 sec
# 1.5k x 1.5k ->  11.844 sec

CHECKFIELD       $DEF_IMG EXPTIME=21.0 NDUMMYREAD=2
CHECKFIELD       $DEF_IMG EXPTIME=4.0 NDUMMYREAD=2 PRD_SIZE=512


##  DATA ACQUISITION 
##  EXAMPLE OF 2-POINT DITHER CASE
GETOBJECT        $DEF_IMG EXPTIME=21.0 NDUMMYREAD=2 DITHNUM=3 DITHCENTER=NO DITHLENGTH=60.0 DITHANGLE=-45 DATTYPE=STANDARD_STAR

##  PARTIAL READ WITH 3-POINT DITHER
#  0.5k ... 2.011, 1k ... 5.943, 1.5k ... 11.844 (+1.5s recommended)
GETOBJECT        $DEF_IMG EXPTIME=3.5 NDUMMYREAD=2 PRD_SIZE=512 DITHNUM=3 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=-15 DATTYPE=STANDARD_STAR


</COMMAND>